Server - rack-mountable - 1U - 2-way - no CPU - RAM 0 GB - SATA - hot-swap 2.5" bay(s) - no HDD - Gigabit Ethernet - monitor: none - CTO - TAA Compliant
| Main Specifications | |
|---|---|
| Product Description | HPE ProLiant DL160 Gen10 - rack-mountable - no CPU - 0 GB - no HDD - TAA Compliant |
| Type | Server - rack-mountable |
| Height (Rack Units) | 1U |
| Localization | Region: Worldwide (excluding China, Japan) |
| Server Scalability | 2-way |
| Processor | No CPU |
| RAM | 0 GB (installed) / 1 TB (max) - DDR4 SDRAM |
| Storage Controller | SATA (SATA 6Gb/s) |
| Server Storage Bays | Hot-swap 2.5" |
| Hard Drive | No HDD |
| Optical Storage | No optical drive |
| Video Memory | 16 MB |
| Networking | 1GbE |
| Power Redundancy | Optional |
| Software Included | HPE iLO Standard with Intelligent Provisioning |
| Dimensions (WxDxH) | 17.1 in x 24.2 in x 1.7 in |
| Weight | 24.18 lbs |
| Pricing Type | CTO |
| TAA Compliant | Yes |
| Manufacturer Warranty | Limited warranty - parts and labor - 3 years - on-site - response time: next business day |
| General | |
| Type | Server |
| Product Form Factor | Rack-mountable - 1U |
| Built-in Devices | LED panel |
| Server Scalability | 2-way |
| Hot-Swap Bays Qty | 8 |
| Localization | Region: Worldwide (excluding China, Japan) |
| Expansion / Connectivity | |
| Bays | 8 (total) / 8 (free) x hot-swap 2.5" SFF |
| Slots | 1 (total) / 1 (free) x microSD Card (internal) ¦ 1 (total) / 1 (free) x FlexibleLOM (x8 mode) ¦ 1 (total) / 1 (free) x PCIe 3.0 x8 - low-profile ¦ 1 (total) / 1 (free) x PCIe 3.0 x16 - half-length, full-height |
| Interfaces | 1 x VGA ¦ 2 x LAN (Gigabit Ethernet) ¦ 1 x HPE iLO - Type A (1 front) (service port) ¦ 1 x HPE iLO - RJ-45 (1 rear) (management port) ¦ 4 x USB 3.0 (1 front, 2 rear, 1 internal) |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - parts and labor - 3 years - on-site - response time: next business day |
| Miscellaneous | |
| Compliant Standards | WEEE, TLS v1.2, ASHRAE Class A4, ASHRAE Class A3, ACPI 6.1, SMBIOS 3.1, UEFI 2.6, Active Directory v1.0 |
| Pricing Type | CTO |
| TAA Compliant | Yes |
| RAM | |
| Installed Size | 0 GB / 1 TB (max) |
| Technology | DDR4 SDRAM |
| Form Factor | DIMM 288-pin |
| Slots | 16 (total) / 16 (empty) |
| Features | Registered, slots 9 - 16 are available in two-processor configuration only, Load-Reduced DIMM (LRDIMM), HPE SmartMemory |
| RAM Supported | 1 TB registered ¦ 1 TB Load-Reduced |
| Networking | |
| Ethernet Ports | 2 x Gigabit Ethernet |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Remote Management Protocol | SNMP 3, IPMI 2.0 |
| Features | Wake on LAN (WoL), PXE support |
| Power | |
| Device Type | Power supply - hot-plug |
| Power Redundancy | Optional |
| Power Redundancy Scheme | 1+1 (with optional power supply) |
| Installed Qty | 0 |
| Max Supported Qty | 2 |
| Environmental Parameters | |
| Min Operating Temperature | 50 °F |
| Max Operating Temperature | 95 °F |
| Humidity Range Operating | 8 - 90% RH (non-condensing) |
| Sound Emission | 33 dBA |
| Storage Controller | |
| Type | SATA |
| Controller Interface Type | SATA 6Gb/s |
| Channel Qty | 14 |
| RAID Level | RAID 0, RAID 1, RAID 5, RAID 10 |
| Optical Storage | |
| Type | No optical drive |
| Monitor | |
| Monitor Type | None. |
| Graphics Controller | |
| Video Memory | 16 MB |
| Video Interfaces | VGA |
| Operating System / Software | |
| Software | HPE iLO Standard with Intelligent Provisioning |
| Hard Drive | |
| Type | No HDD |
| Dimensions & Weight | |
| Width | 17.1 in |
| Depth | 24.2 in |
| Height | 1.7 in |
| Weight | 24.18 lbs |
| Processor / Chipset | |
| CPU | No CPU |
| Max CPU Qty | 2 |
| CPU Upgradability | Upgradable |
| Chipset Type | Intel C622 |